Cisco ASA cannot get "inside" vlan to internet through "outside" vlan



Cisco ASA Cannot Get Inside VLAN to Internet Through Outside VLAN

As an IT administrator, you may have encountered a situation where you cannot get an inside VLAN to the Internet through an outside VLAN. This can occur when using a Cisco ASA firewall and can be quite a tricky problem to solve.

In order to get the inside VLAN to the Internet, you must first understand the basics of the Cisco ASA firewall. The Cisco ASA firewall is an enterprise-level firewall solution that is used to provide network security and access control. It is a firewall that can be used to control traffic between different networks, as well as to protect internal networks from external threats.

When you are using a Cisco ASA firewall, there are two distinct networks: the inside and the outside. The inside network is the protected network, and the outside network is the unprotected network. In order for traffic to pass between the two networks, you must configure the Cisco ASA firewall to allow traffic from the outside to the inside.

To get the inside VLAN to the Internet, you must first configure the Cisco ASA firewall to allow traffic from the outside to the inside. You can do this by creating a “rule” that specifies which IP addresses can access the inside network. This rule can be created using the Cisco ASA web interface, or by using the CLI (Command Line Interface). Once the rule is created, you must then create another rule that allows the inside VLAN to access the Internet. This rule can be created in the same way as the first rule.

Once the rules have been created, you must then configure the router to route traffic from the inside VLAN to the outside network. This can be done by creating a static route in the router’s configuration. This static route should specify the IP address of the outside network and the IP address of the inside VLAN.

Finally, you must ensure that the firewall is allowing traffic from the inside VLAN to the outside network. This can be done by creating an access control list (ACL) in the Cisco ASA web interface or by using the CLI. The ACL should specify which IP addresses are allowed to access the outside network.

Once these steps have been completed, you should be able to get the inside VLAN to the Internet through the outside VLAN. If you are still having trouble getting the inside VLAN to the Internet, you may need to contact your Cisco ASA support team for assistance.

In conclusion, getting an inside VLAN to the Internet through an outside VLAN can be a tricky problem to solve. However, by understanding the basics of the Cisco ASA firewall and configuring the router as well as creating the appropriate rules and ACLs, you should be able to get the inside VLAN to the Internet. If you are still having difficulty, you may need to contact your Cisco ASA support team for further assistance.

Inquire Now

Thank you! Your submission has been received!
Oops! Something went wrong while submitting the form.
Find your next full or part-time role here

ScaleDesk can either help you find your next full time gig or a part time side gig where you can create extra income!

Onboard with us once
Skip HR screening and go to the final interview with with only your resume and a video interview you never have to redo
Get paid electronically every month for the hours you work
We will be your reference even if you work for us once

IT Teams: Use ScaleDesk to augment your team

Schedule Demo